UPS DEXP CEE-E 1500VA

#1281938

UPS DEXP CEE-E 1500VA

[linear-interactive, 1500 VA, 900 W, 4 × CEE 7 (Type F outlet)] details

Not on sale

Total Output Power (VA)
  • Characteristics
  • Feedback 4082
  • Service rating (Reliability assessment)
  • Instructions and files

Characteristics UPS DEXP CEE-E 1500VA

General parameters

Type
UPS
Model
DEXP CEE-E 1500VA
Main Color
black
Type
linear-interactive
Form Factor
Tower

Technical parameters

Maximum Output Power
1500 VA
Effective Power Output
900 W
Minimum Input Voltage
165 V
Max Input Voltage
295 V
Min Input Frequency
45 Hz
Max Input Frequency
55 Hz
Output Voltage Stability
± 10 %
Minimum Output Frequency
50 Hz
Max Output Frequency
60 Hz
Wave Form
modified sine wave
Runtime
5 min (900W)
Delay When Switching to Battery
10 ms
Safety Features
short-circuit protection, high-voltage surge protection, input voltage filtering, overload protection

Connectors

Number and Type of Power Output Connectors
4 × CEE 7 (Type F outlet)
Number of Power Output Connectors (UPS)
4
Extra Ports
USB
Port Layout
vertical

Battery

Charging Time
8 h
Battery Voltage and Capacity
12V/8Ah
Replaceable Batteries
yes
Battery Hot Swap
none
Number of Batteries
2 pcs
External Battery Connection
none

Additional Information

Cold Start
yes
Display
none
Noise Level
45 dB
Operating Temperature
from 0 to +40°C
Package Contents
power cable, documentation, USB cable

Dimensions and Weight

Depth
320 mm
Width
115 mm
Height
220 mm
Weight
9.8 kg

Description

The DEXP CEE-E 1500VA UPS is a line-interactive model. It is used for voltage regulation and protecting equipment from breakdown. Additionally, the UPS acts as a backup power source in case of an emergency power outage.
The DEXP CEE-E 1500VA model is equipped with four Schuko output sockets. The maximum output power is 900 W. Under full load, the UPS can run for 5 minutes on battery power. Transferring power to the battery takes 10 ms, preventing the loss of important data on computers.
The UPS contains 12 V batteries with a capacity of 8 Ah. A full battery charge takes 8 hours. Two batteries are installed inside the casing and can be replaced if necessary.
The UPS provides protection for connected equipment against overload, short circuit, and high-voltage surges, and it filters interference. The input voltage can range from 165 to 295 V. The UPS stabilizes this parameter, with deviations possible within 10 percent. An audible alarm and LED indicators are used to monitor the ongoing operation of the device.